Introduction of UHDZ Shingles Installation
Dreaming of a new roof that will enhance the look of your house while offering the protection it deserves? Look no further than UHDZ GAF shingles! These innovative shingles are very strong and have a texture similar to natural slate or wooden shingles. But how do we turn this into a reality? Installation of roofs is not easy and it is made easier by the right knowledge and help from expert roofing contractors like MK Best Roofing. This step-by-step guide will walk you through the stages involved in installing UHDZ shingles.
Step 1: Removing the Old Roof
The process of installing a new roof starts by removing the old one. This means tearing off all the old shingles, and possibly any other materials which may be on the roof such as flashing, underlayment, or nails. It is a process that will begin early in the morning, and may take a few hours depending on the size and complexity of your roof.
Your roofing contractor should take multiple steps to protect your property before this process starts, including covering sensitive areas of your home and yard with tarps, arranging a dumpster to dispose of the old materials, and using wooden planks to cover areas like your garden or your air conditioning unit to avoid possible damage.
Step 2: Checking And Replacing Roof Decking
Once the old roof has been stripped off, the roofing contractor is likely to assess the roof deck to determine its condition. Roof decking is the layer of wood that is used to attach roofing materials to the frame of the building. If any wood has been damaged, the material will be repaired with new plywood or oriented strand board (OSB). This step is important to establish a strong and firm base for the new roof.
Oriented Strand Board is the most popular roof decking available in the market today. It is produced by compressing layers of wood strands and resin together to produce a hard panel. Because it is strong and inexpensive, it is commonly used for roof decking.
Step 3: Drip Edge Installation
The next step is to install a drip edge along the eaves and rakes of the roof. Drip edge is a metal strip which is installed at the corners of the roof to make sure that water does not find its way behind the shingles and into the roof decking. There are several different materials used for drip edges, including aluminum and PVC.
Step 4: Applying Underlayment to the Roof Decking
Once you’ve put the drip edge in place, the next thing to do is cover the roof decking with underlayment. Underlayment is a water-resistant barrier that is installed over the roof decking to provide an extra layer of protection against water damage. The most common materials used for underlayment are felt paper and synthetic underlayment made from fiberglass or polyester.
Synthetic underlayment is often preferred over felt paper because it offers several benefits. It’s lighter and tougher, making it easier for contractors to install and walk on without accidentally tearing through it.
Step 5: Waterproofing Valleys with a Leak Barrier
In areas where two roof planes meet, such as in a valley, a special leak barrier is installed to prevent water from working its way under the shingles and into the roof decking. There are several different types of leak barriers available, including self-adhesive membranes and metal flashing. These membranes are good for providing additional protection in areas where water will stand for a lot of time, like in valleys, around penetrations, and on lower-slope roofs.
Step 6: Laying Starter Shingles
After the underlayment and leak barrier have been properly installed, you can start laying the shingles. The first row of shingles is installed using starter shingles, which are designed to provide a secure base for the rest of the shingles.
Previously, contractors used upside-down shingles as the first layer of shingles, but recent innovations have eliminated this technique. The starter shingles are thinner than a normal shingle would be so that the front layer sits flat on the roof and allows water to run off more easily. They also provide a better and stickier base to prevent wind from blowing up underneath the first line of shingles.
Step 7: Add Flashing
Flashing is placed around walls and other openings like chimneys and vents to stop water from getting in. Flashing can be made from various materials, including metal and rubber and can be installed using different methods, depending on what it’s protecting, and where it’s located on the roof.
Step 8: Installation of UHDZ Shingles
You can now go ahead and install the roofing shingles as all the protective materials are already in place. Timberline UHDZ Shingles are an excellent choice due to their unique and impressive features. They are the best roofing shingles that include a patent-pending Dual Shadow Line that generates stunning sunset shadows during the day and improves the aesthetic value of your home. In addition, it comes with a 30-year StainGuard Plus PRO Limited Warranty that guards your roof against the blue-green algae staining.
Step 9: Finishing with Ridge Cap
Once the main layer of UHDZ shingles has been installed, it’s time to finish off the roof with ridge cap shingles. Ridge cap shingles cover the ridge of the roof, where two roof planes meet. They come in different colors and styles to match the main layer of shingles.
Step 10: Clear Up the Mess
The last process that needs to be considered as part of putting up a new roof is the cleaning process. Roofing debris which include the old shingles, nails and any other related materials that may have been used in the roofing process will be cleaned from the site by the roofing contractor. They’ll use a blower to ensure that nothing is left on the roof, clean out the gutters in the process, and use magnets throughout your yard and around the house to remove the loose nails and debris.
Additionally, the roofing contractor will perform a full inspection once your replacement is complete. They’ll get on your roof, take a look around, answer any questions that you may have, and make sure the quality matches the high standards you expect when investing in a roof replacement.
Contact MK Best Roofing to Install UHDZ Shingles
If you are ready to upgrade your home with the best roofing shingles, then don’t settle for anything less than the best! MK Best Roofing is your trusted roofing partner in Long Island. We are a Master Elite GAF certified company and offer comprehensive roof installation services using UHDZ shingles across Nassau County, Suffolk County, and Queens County.
Whether you require a complete roof replacement or top-notch repair services, our team of licensed and insured professionals is dedicated to exceeding your expectations. Reach out to us today for a free consultation and witness how quality craftsmanship can transform your home appeal!